Leofoto BC-02 QR Binocular Tripod Mounting Clamp

CLICK TO ENLARGE (3)

The Leofoto BC-02 lets you mount your binoculars to your tripod by clamping around the body of one of the lenses. The clamp capacity will fit binoculars with a lens diameter (including the housing) between 28 and 60mm. There are some rubber pads on the inside of the clamp jaws, which offer protection against damaging your binoculars. The pads also provide better grip to prevent your binoculars rotating in the clamp.

To attach to your tripod there are 1/4" and 3/8" threaded mounting holes on the bottom. You can use these to either attach your tripod quick release plate, or screw directly onto the top of the tripod. The base of the BC-02 is also compatible with Arca Swiss compatible tripod heads (like most of the Leofoto heads) without the need to screwing on an additional plate.

You will also find some additional safety stop screws which you can add to the bottom to prevent the BC-02 sliding out of your clamp if the clamp becomes slightly loose. The use of these may not be compatible with every head but aren't essential for use of the clamp.

BC-02 Binocular Clamp
1/4" to 3/8" adapter
Allen Key
2x Safety Stop Screws
Mini Tool

Add to basket

>

Trade In against this item

>